Commit Graph

307 Commits

Author SHA1 Message Date
riperiperi
a4956591ec Avoid potential race 2021-10-07 01:13:51 +01:00
riperiperi
c61c1ea898 Reregister flush actions when taking a buffer's modified range list.
Fixes a regression from #2663 where buffer flush would not happen after a resize. Specifically caused the world map in Yoshi's Crafted World to flash.

I have other planned changes to this class so this might change soon, but this regression could affect a lot so it couldn't wait.
2021-10-07 00:00:56 +01:00
riperiperi
fff48bb45a
Smaller initial size for ModifiedRangeList & directly inherit range list (#2663)
This fixes a potential regression with the new range list changes, where the cost for creating new ones would be rather large due to creating a 1024 size array. Also reduces cost for range list inheritance by using the first existing range list as a base, rather than creating a new one then adding both lists to it.

The growth size for the RangeList is now identical to its initial size. Every 32 elements was probably a little too common - now it is 1024 for most things and 8 for the buffer modified range list.

The Unmapped and SyncMethod methods have been changed to ensure that they behave properly if the range list is set null. Cleaned up a few calls to use the null-conditional operator.
2021-10-04 15:38:59 -03:00
gdkchan
75f4b1ff2d
Relax sampler pool requirement (#2703) 2021-10-04 14:35:28 -03:00
riperiperi
d92fff541b
Replace CacheResourceWrite with more general "precise" write (#2684)
* Replace CacheResourceWrite with more general "precise" write

The goal of CacheResourceWrite was to notify GPU resources when they were modified directly, by looking up the modified address/size in a structure and calling a method on each resource. The downside of this is that each resource cache has to be queried individually, they all have to implement their own way to do this, and it can only signal to resources using the same PhysicalMemory instance.

This PR adds the ability to signal a write as "precise" on the tracking, which signals a special handler (if present) which can be used to avoid unnecessary flush actions, or maybe even more. For buffers, precise writes specifically do not flush, and instead punch a hole in the modified range list to indicate that the data on GPU has been replaced.

The downside is that precise actions must ignore the page protection bits and always signal - as they need to notify the target resource to ignore the sequence number optimization.

I had to reintroduce the sequence number increment after I2M, as removing it was causing issues in rabbids kingdom battle. However - all resources modified by I2M are notified directly to lower their sequence number, so the problem is likely that another unrelated resource is not being properly updated. Thankfully, doing this does not affect performance in the games I tested.

This should fix regressions from #2624. Test any games that were broken by that. (RF4, rabbids kingdom battle)

I've also added a sequence number increment to ThreedClass.IncrementSyncpoint, as it seems to fix buffer corruption in OpenGL homebrew. (this was a regression from removing sequence number increment from constant buffer update - another unrelated resource thing)

* Add tests.

* Add XML docs for GpuRegionHandle

* Skip UpdateProtection if only precise actions were called

This allows precise actions to skip reprotection costs.
2021-09-29 02:27:03 +02:00
riperiperi
b6e093b0fc
Force copy when auto-deleting a texture with dependencies (#2687)
When a texture is deleted by falling to the bottom of the AutoDeleteCache, its data is flushed to preserve any GPU writes that occurred. This ensures that the data appears in any textures recreated in the future, but didn't account for a texture that already existed with a copy dependency.

This change forces copy dependencies to complete if a texture falls out from from the AutoDeleteCache. (not removed via overlap, as that would be wasted effort)

Fixes broken lighting caused by pausing in SMO's Metro Kingdom. May fix some other issues.
2021-09-29 02:11:05 +02:00
gdkchan
fd7567a6b5
Only make render target 2D textures layered if needed (#2646)
* Only make render target 2D textures layered if needed

* Shader cache version bump

* Ensure topology is updated on channel swap
2021-09-29 01:55:12 +02:00
gdkchan
83bdafccda
Share scales array for graphics and compute (#2653) 2021-09-28 23:52:27 +02:00
riperiperi
7c5ead1c19
Fast path for Inline2Memory buffer write that skips write tracking (#2624)
* Fast path for Inline2Memory buffer write

This PR adds a method to PhysicalMemory that attempts to write all cached resources directly, so that memory tracking can be avoided. The goal of this is both to avoid flushing buffer data, and to avoid raising the sequence number when data is written, which causes buffer and texture handles to be re-checked.

This currently only targets buffers, with a side check on textures that falls back to a tracked write if any exist within the target range. It's not expected to write textures from here - this is just a mechanism to protect us if someone does decide to do that. It's possible to add a fast path for this in future (and for ShaderCache, once that starts using tracking)

The forced read before inline2memory begins has been skipped, as the data is fully written when the transfer is completed anyways. This allows us to flush on read in emergency situations, but still write the new data over the flushed data.

Improves performance on Xenoblade 2 and DE, which was flushing buffer data on the GPU thread when trying to write compute data. May improve performance in other games that write SSBOs from compute, and update data in the same/nearby pages often.

Super Smash Bros Ultimate should probably be tested to make sure the vertex explosions haven't returned, as I think that's what this AdvanceSequence was for.

* ForceDirty before write, to make sure data does not flush over the new write
2021-09-19 15:09:53 +02:00
gdkchan
f08a280ade
Use shader subgroup extensions if shader ballot is not supported (#2627)
* Use shader subgroup extensions if shader ballot is not supported

* Shader cache version bump + cleanup

* The type is still required on the table
2021-09-19 14:38:39 +02:00
riperiperi
7379bc2f39
Array based RangeList that caches Address/EndAddress (#2642)
* Array based RangeList that caches Address/EndAddress

In isolation, this was more than 2x faster than the RangeList that checks using the interface. In practice I'm seeing much better results than I expected. The array is used because checking it is slightly faster than using a list, which loses time to struct copies, but I still want that data locality.

A method has been added to the list to update the cached end address, as some users of the RangeList currently modify it dynamically.

Greatly improves performance in Super Mario Odyssey, Xenoblade and any other GPU limited games.

* Address Feedback
2021-09-19 14:22:26 +02:00
riperiperi
b0af010247
Set texture/image bindings in place rather than allocating and passing an array (#2647)
* Remove allocations for texture bindings and state

* Rent rather than stackalloc + copy

A bit faster.
2021-09-19 14:03:05 +02:00
gdkchan
ac4ec1a015
Account for negative strides on DMA copy (#2623)
* Account for negative strides on DMA copy

* Should account for non-zero Y
2021-09-11 22:54:18 +02:00
riperiperi
b0e410a828
Lift textures in the AutoDeleteCache for all modifications. (#2615)
* Lift textures in the AutoDeleteCache for all modifications.

Before, this would only apply to render targets and texture blit. Now it applies to image stores, the fast dma copy path and any other type of modification.

Image store always at least has one reference in the texture pool, so the function of the AutoDeleteCache keeping textures _alive_ is not useful, but a very important function for a while has been its use to flush textures in order of modification when they are dereferenced, so that their data is not lost.

Before, textures populated using image stores were being dereferenced and reloaded as garbage. Now, when these textures are dereferenced, their data will be put back into memory, and everything stays intact.

Fixes lighting breaking when switching levels in THPS1+2, and potentially some more UE4 games. I've tested a bunch more games for regressions and performance impact, but they all seem fine.

* Lift copy srcTexture so that it doesn't remain referenceless

* Perform lift before reference count change on unbind.

It's important to lift on unbind as that is the moment the texture was truly last modified, but definitely not after releasing every single reference.
2021-09-11 21:52:54 +02:00
riperiperi
f0b00c1ae9
Fix TXQ for 3D textures. (#2613)
* Fix TXQ for 3D textures.

Assumes the texture is 3D if the component mask contains Z.

This fixes a bug in UE4 games where parts of the map had garbage pointers to lighting voxels, as the lookup 3D texture was not being initialized. Most notable game is THPS1+2.

May need another PR to keep image store data alive and properly flush it in order using the AutoDeleteCache.

* Get sampler type for TextureSize from bound textures.
2021-09-02 00:17:43 -03:00
riperiperi
142cededd4
Implement Shader Instructions SUATOM and SURED (#2090)
* Initial Implementation

* Further improvements (no support for float/64-bit types)

* Merge atomic and reduce instructions, add missing format switch

* Fix rebase issues.

* Not used.

* Whoops. Fixed.

* Partial implementation of inc/dec, cleanup and TODOs

* Remove testing path

* Address Feedback
2021-08-31 02:51:57 -03:00
gdkchan
416dc8fde4
Fix out-of-bounds shader thread shuffle (#2605)
* Fix out-of-bounds shader thread shuffle

* Shader cache version bump
2021-08-30 14:02:40 -03:00
gdkchan
82cefc8dd3
Handle indirect draw counts with non-zero draw starts properly (#2593) 2021-08-29 16:52:38 -03:00
riperiperi
15e7fe3ac9
Avoid deleting textures when their data does not overlap. (#2601)
* Avoid deleting textures when their data does not overlap.

It's possible that while two textures start and end addresses indicate an overlap, that the actual data contained within them is sparse due to a layer stride. One such possibility is array slices of a cubemap at different mip levels - they overlap on a whole, but the actual texture data fills the gaps between each other's layers rather than actually overlapping.

This fixes issues with UE4 games having incorrect lighting (solid white screen or really dark shadows). There are still remaining issues with games that use the 3D texture prebaked lighting, such as THPS1+2.

This PR also fixes a bug with TexturePool's resized texture handling where the base level in the descriptor was not considered.

* AllRegions granularity for 3d textures is now by level rather than by slice.

* Address feedback
2021-08-29 16:22:13 -03:00
riperiperi
76e8f9ac87
Only reupload the texture scale array if it changes. (#2595)
* Only reupload the texture scale array if it changes.

Before, this would be called all the time if any shader needed a scale value. The cost of doing this has increased with threaded-gal, as the scale array is copied to a span pool, and it's was called on pretty much every draw sometimes.

This improves GPU performance in games, scaled or not. Most affected game seems to be Xenoblade Chronicles: Definitive Edition.

* Just use = instead of |=
2021-08-27 17:08:30 -03:00
gdkchan
ee1038e542
Initial support for shader attribute indexing (#2546)
* Initial support for shader attribute indexing

* Support output indexing too, other improvements

* Fix order

* Address feedback
2021-08-27 01:44:47 +02:00
riperiperi
ec3e848d79
Add a Multithreading layer for the GAL, multi-thread shader compilation at runtime (#2501)
* Initial Implementation

About as fast as nvidia GL multithreading, can be improved with faster command queuing.

* Struct based command list

Speeds up a bit. Still a lot of time lost to resource copy.

* Do shader init while the render thread is active.

* Introduce circular span pool V1

Ideally should be able to use structs instead of references for storing these spans on commands. Will try that next.

* Refactor SpanRef some more

Use a struct to represent SpanRef, rather than a reference.

* Flush buffers on background thread

* Use a span for UpdateRenderScale.

Much faster than copying the array.

* Calculate command size using reflection

* WIP parallel shaders

* Some minor optimisation

* Only 2 max refs per command now.

The command with 3 refs is gone. 😌

* Don't cast on the GPU side

* Remove redundant casts, force sync on window present

* Fix Shader Cache

* Fix host shader save.

* Fixup to work with new renderer stuff

* Make command Run static, use array of delegates as lookup

Profile says this takes less time than the previous way.

* Bring up to date

* Add settings toggle. Fix Muiltithreading Off mode.

* Fix warning.

* Release tracking lock for flushes

* Fix Conditional Render fast path with threaded gal

* Make handle iteration safe when releasing the lock

This is mostly temporary.

* Attempt to set backend threading on driver

Only really works on nvidia before launching a game.

* Fix race condition with BufferModifiedRangeList, exceptions in tracking actions

* Update buffer set commands

* Some cleanup

* Only use stutter workaround when using opengl renderer non-threaded

* Add host-conditional reservation of counter events

There has always been the possibility that conditional rendering could use a query object just as it is disposed by the counter queue. This change makes it so that when the host decides to use host conditional rendering, the query object is reserved so that it cannot be deleted. Counter events can optionally start reserved, as the threaded implementation can reserve them before the backend creates them, and there would otherwise be a short amount of time where the counter queue could dispose the event before a call to reserve it could be made.

* Address Feedback

* Make counter flush tracked again.

Hopefully does not cause any issues this time.

* Wait for FlushTo on the main queue thread.

Currently assumes only one thread will want to FlushTo (in this case, the GPU thread)

* Add SDL2 headless integration

* Add HLE macro commands.

Co-authored-by: Mary <mary@mary.zone>
2021-08-27 00:31:29 +02:00
mpnico
8e1adb95cf
Add support for HLE macros and accelerate MultiDrawElementsIndirectCount #2 (#2557)
* Add support for HLE macros and accelerate MultiDrawElementsIndirectCount

* Add missing barrier

* Fix index buffer count

* Add support check for each macro hle before use

* Add missing xml doc

Co-authored-by: gdkchan <gab.dark.100@gmail.com>
2021-08-26 23:50:28 +02:00
riperiperi
bdc1f91a5b
Remove pool cache entries for incompatible overlapping textures (#2568)
This greatly reduces memory usage in games that aggressively reuse memory without removing dead textures from the pool, such as the Xenoblade games, UE3 games, and to a lesser extent, UE4/unity games.

This change stops memory usage from ballooning in xenoblade and some other games. It will also reduce texture view/dependency complexity in some games - for example in MK8D it will reduce the number of surface copies between lighting cubemaps generated for actors.

There shouldn't be any performance impact from doing this, though the deletion and creation of textures could be improved by improving the OpenGL texture storage cache, which is very simple and limited right now. This will be improved in future.

Another potential error has been fixed with the texture cache, which could prevent data loss when data is interchangably written to textures from both the GPU and CPU. It was possible that the dirty flag for a texture would be consumed without the data being synchronized on next use, due to the old overlap check. This check no longer consumes the dirty flag.

Please test a bunch of games to make sure they still work, and there are no performance regressions.
2021-08-20 17:52:09 -03:00
riperiperi
97aedc030d
Fix GetHandleInformation for mipmapped 3d textures (#2569)
Got this the wrong way round - was causing games to try synchronize mipmap levels of like 52 on a 3d texture with 6 levels. Also, corrected the variable name in the method that _was_ working.
2021-08-20 14:59:39 -03:00
gdkchan
680d3ed198
Enable transform feedback buffer flush (#2552) 2021-08-17 14:09:27 -03:00
gdkchan
eb181425b1
Fix size of cached compute shaders (#2548)
* Fix size of cached compute shaders

* Missed one
2021-08-12 15:59:24 -03:00
gdkchan
8196086f7a
Revert "Calculate vertex buffer sizes from index buffer (#1663)" (#2544)
This reverts commit 10d649e6d3.
2021-08-11 22:13:48 -03:00
gdkchan
3148c0c21c
Unify GpuAccessorBase and TextureDescriptorCapableGpuAccessor (#2542)
* Unify GpuAccessorBase and TextureDescriptorCapableGpuAccessor

* Shader cache version bump
2021-08-11 18:56:59 -03:00
gdkchan
c3e2646f9e
Workaround for Intel FrontFacing built-in variable bug (#2540) 2021-08-11 23:01:06 +02:00
riperiperi
0a80a837cb
Use "Undesired" scale mode for certain textures rather than blacklisting (#2537)
* Use "Undesired" scale mode for certain textures rather than blacklisting

* Nit

Co-authored-by: gdkchan <gab.dark.100@gmail.com>

Co-authored-by: gdkchan <gab.dark.100@gmail.com>
2021-08-11 22:44:51 +02:00
gdkchan
ed754af8d5
Make sure attributes used on subsequent shader stages are initialized (#2538) 2021-08-11 22:27:00 +02:00
gdkchan
10d649e6d3
Calculate vertex buffer sizes from index buffer (#1663)
* Calculate vertex buffer size from maximum index buffer index

* Increase maximum index buffer count for it to be considered profitable for counting
2021-08-11 22:06:09 +02:00
gdkchan
0f6ec446ea
Replace BGRA and scale uniforms with a uniform block (#2496)
* Replace BGRA and scale uniforms with a uniform block

* Setting the data again on program change is no longer needed

* Optimize and resolve some warnings

* Avoid redundant support buffer updates

* Some optimizations to BindBuffers (now inlined)

* Unify render scale arrays
2021-08-11 21:33:43 +02:00
gdkchan
d9d18439f6
Use a new approach for shader BRX targets (#2532)
* Use a new approach for shader BRX targets

* Make shader cache actually work

* Improve the shader pattern matching a bit

* Extend LDC search to predecessor blocks, catches more cases

* Nit

* Only save the amount of constant buffer data actually used. Avoids crashes on partially mapped buffers

* Ignore Rd on predicate instructions, as they do not have a Rd register (catches more cases)
2021-08-11 20:59:42 +02:00
gdkchan
ff5df5d8a1
Support non-contiguous copies on I2M and DMA engines (#2473)
* Support non-contiguous copies on I2M and DMA engines

* Vector copy should start aligned on I2M

* Nits

* Zero extend the offset
2021-08-04 22:20:58 +02:00
riperiperi
4b60371e64
Return mapped buffer pointer directly for flush, WriteableRegion for textures (#2494)
* Return mapped buffer pointer directly for flush, WriteableRegion for textures

A few changes here to generally improve performance, even for platforms not using the persistent buffer flush.

- Texture and buffer flush now return a ReadOnlySpan<byte>. It's guaranteed that this span is pinned in memory, but it will be overwritten on the next flush from that thread, so it is expected that the data is used before calling again.
- As a result, persistent mappings no longer copy to a new array - rather the persistent map is returned directly as a Span<>. A similar host array is used for the glGet flushes instead of allocating new arrays each time.
- Texture flushes now do their layout conversion into a WriteableRegion when the texture is not MultiRange, which allows the flush to happen directly into guest memory rather than into a temporary span, then copied over. This avoids another copy when doing layout conversion.

Overall, this saves 1 data copy for buffer flush, 1 copy for linear textures with matching source/target stride, and 2 copies for block textures or linear textures with mismatching strides.

* Fix tests

* Fix array pointer for Mesa/Intel path

* Address some feedback

* Update method for getting array pointer.
2021-07-19 19:10:54 -03:00
riperiperi
ca5ac37cd6
Flush buffers and texture data through a persistent mapped buffer. (#2481)
* Use persistent buffers to flush texture data

* Flush buffers via copy to persistent buffers.

* Log error when timing out, small refactoring.
2021-07-16 18:10:20 -03:00
gdkchan
bb6fab2009
Ensure that DMA copy target textures are kept alive or flushed (#2478) 2021-07-14 14:48:57 -03:00
gdkchan
96a070a9a7
Do not require texture and sampler pools being initialized (#2476) 2021-07-14 14:27:22 -03:00
gdkchan
04dce402ac
Implement a fast path for I2M transfers (#2467) 2021-07-12 16:48:57 -03:00
gdkchan
9b08abc644
Fix shader compilation on shaders that uses rectangle textures (#2471) 2021-07-12 16:20:33 -03:00
gdkchan
40b21cc3c4
Separate GPU engines (part 2/2) (#2440)
* 3D engine now uses DeviceState too, plus new state modification tracking

* Remove old methods code

* Remove GpuState and friends

* Optimize DeviceState, force inline some functions

* This change was not supposed to go in

* Proper channel initialization

* Optimize state read/write methods even more

* Fix debug build

* Do not dirty state if the write is redundant

* The YControl register should dirty either the viewport or front face state too, to update the host origin

* Avoid redundant vertex buffer updates

* Move state and get rid of the Ryujinx.Graphics.Gpu.State namespace

* Comments and nits

* Fix rebase

* PR feedback

* Move changed = false to improve codegen

* PR feedback

* Carry RyuJIT a bit more
2021-07-11 17:20:40 -03:00
gdkchan
59900d7f00
Unscale textureSize when resolution scaling is used (#2441)
* Unscale textureSize when resolution scaling is used

* Fix textureSize on compute

* Flag texture size as needing res scale values too
2021-07-09 00:09:07 -03:00
gdkchan
b02719cf41
Flush UBO updates more frequently (#2407) 2021-07-07 21:20:52 -03:00
gdkchan
8b44eb1c98
Separate GPU engines and make state follow official docs (part 1/2) (#2422)
* Use DeviceState for compute and i2m

* Migrate 2D class, more comments

* Migrate DMA copy engine

* Remove now unused code

* Replace GpuState by GpuAccessorState on GpuAcessor, since compute no longer has a GpuState

* More comments

* Add logging (disabled)

* Add back i2m on 3D engine
2021-07-07 20:56:06 -03:00
gdkchan
d125fce3e8
Allow shader language and target API to be specified on the shader translator (#2402) 2021-07-06 21:20:06 +02:00
riperiperi
94cc365b63
Honour copy dependencies when switching render target (#2433)
* Honour copy dependencies when switching render target

When switching from one render target to another, when both have a copy dependency to each other, a copy can be deferred on the second target when unbinding the first.

Before, this would not be honoured before binding the new texture, so the copy would stay deferred until the render targets change again, at which point it would copy in old data and essentially clear all the draws done during that time.

This change runs synchronize memory to make sure that copies are honoured. This can cause a redundant copy, but it's better than it breaking for now.

This should fix miiedit on AMD/Intel GPUs on windows. May fix other games, or perhaps rare copy dependency bugs on NVIDIA too.

* Address feedback
2021-07-03 01:55:04 -03:00
gdkchan
fbb4019ed5
Initial support for separate GPU address spaces (#2394)
* Make GPU memory manager a member of GPU channel

* Move physical memory instance to the memory manager, and the caches to the physical memory

* PR feedback
2021-06-29 19:32:02 +02:00
gdkchan
fefd4619a5
Add support for custom line widths (#2406) 2021-06-25 20:11:54 -03:00