initial commit after mainsail
This commit is contained in:
commit
c6814d73ad
50
.moonraker.conf.bkp
Normal file
50
.moonraker.conf.bkp
Normal file
@ -0,0 +1,50 @@
|
|||||||
|
[server]
|
||||||
|
host = 0.0.0.0
|
||||||
|
port = 7125
|
||||||
|
klippy_uds_address = /home/tstarr/printer_data/comms/klippy.sock
|
||||||
|
|
||||||
|
[authorization]
|
||||||
|
trusted_clients =
|
||||||
|
10.0.0.0/8
|
||||||
|
127.0.0.0/8
|
||||||
|
169.254.0.0/16
|
||||||
|
172.16.0.0/12
|
||||||
|
192.168.0.0/16
|
||||||
|
FE80::/10
|
||||||
|
::1/128
|
||||||
|
cors_domains =
|
||||||
|
*.lan
|
||||||
|
*.local
|
||||||
|
*://localhost
|
||||||
|
*://localhost:*
|
||||||
|
*://my.mainsail.xyz
|
||||||
|
*://app.fluidd.xyz
|
||||||
|
|
||||||
|
[octoprint_compat]
|
||||||
|
|
||||||
|
[history]
|
||||||
|
|
||||||
|
[update_manager]
|
||||||
|
channel = dev
|
||||||
|
refresh_interval = 168
|
||||||
|
|
||||||
|
[update_manager mainsail-config]
|
||||||
|
type = git_repo
|
||||||
|
primary_branch = master
|
||||||
|
path = ~/mainsail-config
|
||||||
|
origin = https://github.com/mainsail-crew/mainsail-config.git
|
||||||
|
managed_services = klipper
|
||||||
|
|
||||||
|
[update_manager mainsail]
|
||||||
|
type = web
|
||||||
|
channel = stable
|
||||||
|
repo = mainsail-crew/mainsail
|
||||||
|
path = ~/mainsail
|
||||||
|
|
||||||
|
[update_manager crowsnest]
|
||||||
|
type = git_repo
|
||||||
|
path = ~/crowsnest
|
||||||
|
origin = https://github.com/mainsail-crew/crowsnest.git
|
||||||
|
managed_services = crowsnest
|
||||||
|
install_script = tools/pkglist.sh
|
||||||
|
|
||||||
6
KlipperScreen.conf
Normal file
6
KlipperScreen.conf
Normal file
@ -0,0 +1,6 @@
|
|||||||
|
|
||||||
|
#~# --- Do not edit below this line. This section is auto generated --- #~#
|
||||||
|
#~#
|
||||||
|
#~# [main]
|
||||||
|
#~# use_dpms = False
|
||||||
|
#~#
|
||||||
47
crowsnest.conf
Normal file
47
crowsnest.conf
Normal file
@ -0,0 +1,47 @@
|
|||||||
|
#### crowsnest.conf
|
||||||
|
#### This is a typical default config.
|
||||||
|
#### Also used as default in mainsail / MainsailOS
|
||||||
|
#### See:
|
||||||
|
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
|
||||||
|
#### for details to configure to your needs.
|
||||||
|
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
#### #####
|
||||||
|
#### Information about ports and according URL's #####
|
||||||
|
#### #####
|
||||||
|
#####################################################################
|
||||||
|
#### #####
|
||||||
|
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
|
||||||
|
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
|
||||||
|
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
|
||||||
|
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
|
||||||
|
#### #####
|
||||||
|
#### Note: These ports are default for most Mainsail #####
|
||||||
|
#### installations. To use any other port would involve #####
|
||||||
|
#### changing the proxy configuration or using directly #####
|
||||||
|
#### http://<ip>:<port>/?action=[stream/snapshot] #####
|
||||||
|
#### #####
|
||||||
|
#####################################################################
|
||||||
|
#### RTSP Stream URL: ( if enabled and supported ) #####
|
||||||
|
#### rtsp://<ip>:<rtsp_port>/stream.h264 #####
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
|
||||||
|
[crowsnest]
|
||||||
|
log_path: /home/tstarr/printer_data/logs/crowsnest.log
|
||||||
|
log_level: verbose # Valid Options are quiet/verbose/debug
|
||||||
|
delete_log: false # Deletes log on every restart, if set to true
|
||||||
|
no_proxy: false
|
||||||
|
|
||||||
|
[cam 1]
|
||||||
|
mode: camera-streamer # ustreamer - Provides mjpg and snapshots. (All devices)
|
||||||
|
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
|
||||||
|
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
|
||||||
|
rtsp_port: 8554 # Set different ports for each device!
|
||||||
|
port: 8080 # HTTP/MJPG Stream/Snapshot Port
|
||||||
|
device: /base/soc/i2c0mux/i2c@1/imx708@1a # See Log for available ...
|
||||||
|
resolution: 640x480 # widthxheight format
|
||||||
|
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
|
||||||
|
#custom_flags: # You can run the Stream Services with custom flags.
|
||||||
|
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
|
||||||
1
mainsail.cfg
Symbolic link
1
mainsail.cfg
Symbolic link
@ -0,0 +1 @@
|
|||||||
|
/home/tstarr/mainsail-config/client.cfg
|
||||||
50
moonraker.conf
Normal file
50
moonraker.conf
Normal file
@ -0,0 +1,50 @@
|
|||||||
|
[server]
|
||||||
|
host: 0.0.0.0
|
||||||
|
port: 7125
|
||||||
|
klippy_uds_address: /home/tstarr/printer_data/comms/klippy.sock
|
||||||
|
|
||||||
|
[authorization]
|
||||||
|
trusted_clients:
|
||||||
|
10.0.0.0/8
|
||||||
|
127.0.0.0/8
|
||||||
|
169.254.0.0/16
|
||||||
|
172.16.0.0/12
|
||||||
|
192.168.0.0/16
|
||||||
|
FE80::/10
|
||||||
|
::1/128
|
||||||
|
cors_domains:
|
||||||
|
*.lan
|
||||||
|
*.local
|
||||||
|
*://localhost
|
||||||
|
*://localhost:*
|
||||||
|
*://my.mainsail.xyz
|
||||||
|
*://app.fluidd.xyz
|
||||||
|
|
||||||
|
[octoprint_compat]
|
||||||
|
|
||||||
|
[history]
|
||||||
|
|
||||||
|
[update_manager]
|
||||||
|
channel: dev
|
||||||
|
refresh_interval: 168
|
||||||
|
|
||||||
|
[update_manager mainsail-config]
|
||||||
|
type: git_repo
|
||||||
|
primary_branch: master
|
||||||
|
path: ~/mainsail-config
|
||||||
|
origin: https://github.com/mainsail-crew/mainsail-config.git
|
||||||
|
managed_services: klipper
|
||||||
|
|
||||||
|
[update_manager mainsail]
|
||||||
|
type: web
|
||||||
|
channel: stable
|
||||||
|
repo: mainsail-crew/mainsail
|
||||||
|
path: ~/mainsail
|
||||||
|
|
||||||
|
# Crowsnest update_manager entry
|
||||||
|
[update_manager crowsnest]
|
||||||
|
type: git_repo
|
||||||
|
path: ~/crowsnest
|
||||||
|
origin: https://github.com/mainsail-crew/crowsnest.git
|
||||||
|
managed_services: crowsnest
|
||||||
|
install_script: tools/pkglist.sh
|
||||||
42
moonraker.conf.backup
Normal file
42
moonraker.conf.backup
Normal file
@ -0,0 +1,42 @@
|
|||||||
|
[server]
|
||||||
|
host: 0.0.0.0
|
||||||
|
port: 7125
|
||||||
|
klippy_uds_address: /home/tstarr/printer_data/comms/klippy.sock
|
||||||
|
|
||||||
|
[authorization]
|
||||||
|
trusted_clients:
|
||||||
|
10.0.0.0/8
|
||||||
|
127.0.0.0/8
|
||||||
|
169.254.0.0/16
|
||||||
|
172.16.0.0/12
|
||||||
|
192.168.0.0/16
|
||||||
|
FE80::/10
|
||||||
|
::1/128
|
||||||
|
cors_domains:
|
||||||
|
*.lan
|
||||||
|
*.local
|
||||||
|
*://localhost
|
||||||
|
*://localhost:*
|
||||||
|
*://my.mainsail.xyz
|
||||||
|
*://app.fluidd.xyz
|
||||||
|
|
||||||
|
[octoprint_compat]
|
||||||
|
|
||||||
|
[history]
|
||||||
|
|
||||||
|
[update_manager]
|
||||||
|
channel: dev
|
||||||
|
refresh_interval: 168
|
||||||
|
|
||||||
|
[update_manager mainsail-config]
|
||||||
|
type: git_repo
|
||||||
|
primary_branch: master
|
||||||
|
path: ~/mainsail-config
|
||||||
|
origin: https://github.com/mainsail-crew/mainsail-config.git
|
||||||
|
managed_services: klipper
|
||||||
|
|
||||||
|
[update_manager mainsail]
|
||||||
|
type: web
|
||||||
|
channel: stable
|
||||||
|
repo: mainsail-crew/mainsail
|
||||||
|
path: ~/mainsail
|
||||||
676
printer.cfg
Normal file
676
printer.cfg
Normal file
@ -0,0 +1,676 @@
|
|||||||
|
# This file contains common pin mappings for the BigTreeTech Octopus V1.
|
||||||
|
# To use this config, the firmware should be compiled for the STM32F446 with a "32KiB bootloader"
|
||||||
|
# Enable "extra low-level configuration options" and select the "12MHz crystal" as clock reference
|
||||||
|
|
||||||
|
# after running "make", copy the generated "klipper/out/klipper.bin" file to a
|
||||||
|
# file named "firmware.bin" on an SD card and then restart the OctoPus with that SD card.
|
||||||
|
|
||||||
|
# See docs/Config_Reference.md for a description of parameters.
|
||||||
|
|
||||||
|
## Voron Design VORON2 250/300/350mm BigTreeTech OctoPus V1 TMC2209 UART config
|
||||||
|
|
||||||
|
## *** THINGS TO CHANGE/CHECK: ***
|
||||||
|
## X MCU paths [mcu] section
|
||||||
|
## X Thermistor types [extruder] and [heater_bed] sections - See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types
|
||||||
|
## X Z Endstop Switch location [safe_z_home] section
|
||||||
|
## Homing end position [gcode_macro G32] section
|
||||||
|
## Z Endstop Switch offset for Z0 [stepper_z] section
|
||||||
|
## Probe points [quad_gantry_level] section
|
||||||
|
## Min & Max gantry corner postions [quad_gantry_level] section
|
||||||
|
## PID tune [extruder] and [heater_bed] sections
|
||||||
|
## Probe pin [probe] section
|
||||||
|
## Fine tune E steps [extruder] section
|
||||||
|
|
||||||
|
[include mainsail.cfg]
|
||||||
|
|
||||||
|
[mcu]
|
||||||
|
## Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_1E0035000D50535556323420-if00
|
||||||
|
restart_method: command
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
[printer]
|
||||||
|
kinematics: corexy
|
||||||
|
max_velocity: 300
|
||||||
|
max_accel: 3000 #Max 4000
|
||||||
|
max_z_velocity: 15 #Max 15 for 12V TMC Drivers, can increase for 24V
|
||||||
|
max_z_accel: 350
|
||||||
|
square_corner_velocity: 5.0
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# X/Y Stepper Settings
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## B Stepper - Left
|
||||||
|
## Connected to MOTOR_0
|
||||||
|
## Endstop connected to DIAG_0
|
||||||
|
[stepper_x]
|
||||||
|
step_pin: PF13
|
||||||
|
dir_pin: PF12
|
||||||
|
enable_pin: !PF14
|
||||||
|
rotation_distance: 40
|
||||||
|
microsteps: 32
|
||||||
|
full_steps_per_rotation:400 #set to 200 for 1.8 degree stepper
|
||||||
|
endstop_pin: PG6
|
||||||
|
position_min: 0
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## Uncomment below for 250mm build
|
||||||
|
#position_endstop: 250
|
||||||
|
#position_max: 250
|
||||||
|
|
||||||
|
## Uncomment for 300mm build
|
||||||
|
position_endstop: 300
|
||||||
|
position_max: 300
|
||||||
|
|
||||||
|
## Uncomment for 350mm build
|
||||||
|
#position_endstop: 350
|
||||||
|
#position_max: 350
|
||||||
|
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
homing_speed: 25 #Max 100
|
||||||
|
homing_retract_dist: 5
|
||||||
|
homing_positive_dir: true
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_x]
|
||||||
|
uart_pin: PC4
|
||||||
|
interpolate: false
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
## A Stepper - Right
|
||||||
|
## Connected to MOTOR_1
|
||||||
|
## Endstop connected to DIAG_1
|
||||||
|
[stepper_y]
|
||||||
|
step_pin: PG0
|
||||||
|
dir_pin: PG1
|
||||||
|
enable_pin: !PF15
|
||||||
|
rotation_distance: 40
|
||||||
|
microsteps: 32
|
||||||
|
full_steps_per_rotation:400 #set to 200 for 1.8 degree stepper
|
||||||
|
endstop_pin: PG9
|
||||||
|
position_min: 0
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## Uncomment for 250mm build
|
||||||
|
#position_endstop: 250
|
||||||
|
#position_max: 250
|
||||||
|
|
||||||
|
## Uncomment for 300mm build
|
||||||
|
position_endstop: 300
|
||||||
|
position_max: 300
|
||||||
|
|
||||||
|
## Uncomment for 350mm build
|
||||||
|
#position_endstop: 350
|
||||||
|
#position_max: 350
|
||||||
|
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
homing_speed: 25 #Max 100
|
||||||
|
homing_retract_dist: 5
|
||||||
|
homing_positive_dir: true
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_y]
|
||||||
|
uart_pin: PD11
|
||||||
|
interpolate: false
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Z Stepper Settings
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Z0 Stepper - Front Left
|
||||||
|
## Connected to MOTOR_2
|
||||||
|
## Endstop connected to DIAG_2
|
||||||
|
[stepper_z]
|
||||||
|
step_pin: PF11
|
||||||
|
dir_pin: PG3
|
||||||
|
enable_pin: !PG5
|
||||||
|
rotation_distance: 40
|
||||||
|
gear_ratio: 80:16
|
||||||
|
microsteps: 32
|
||||||
|
#endstop_pin: PG10
|
||||||
|
endstop_pin: probe:z_virtual_endstop
|
||||||
|
|
||||||
|
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
|
||||||
|
## (+) value = endstop above Z0, (-) value = endstop below
|
||||||
|
## Increasing position_endstop brings nozzle closer to the bed
|
||||||
|
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
|
||||||
|
#position_endstop: -0.5
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## Uncomment below for 250mm build
|
||||||
|
#position_max: 210
|
||||||
|
|
||||||
|
## Uncomment below for 300mm build
|
||||||
|
position_max: 260
|
||||||
|
|
||||||
|
## Uncomment below for 350mm build
|
||||||
|
#position_max: 310
|
||||||
|
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
position_min: -5
|
||||||
|
homing_speed: 8
|
||||||
|
second_homing_speed: 3
|
||||||
|
homing_retract_dist: 3
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_z]
|
||||||
|
uart_pin: PC6
|
||||||
|
interpolate: false
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 999999
|
||||||
|
|
||||||
|
## Z1 Stepper - Rear Left
|
||||||
|
## Connected to MOTOR_3
|
||||||
|
[stepper_z1]
|
||||||
|
step_pin: PG4
|
||||||
|
dir_pin: !PC1
|
||||||
|
enable_pin: !PA0
|
||||||
|
rotation_distance: 40
|
||||||
|
gear_ratio: 80:16
|
||||||
|
microsteps: 32
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_z1]
|
||||||
|
uart_pin: PC7
|
||||||
|
interpolate: false
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 999999
|
||||||
|
|
||||||
|
## Z2 Stepper - Rear Right
|
||||||
|
## Connected to MOTOR_4
|
||||||
|
[stepper_z2]
|
||||||
|
step_pin: PF9
|
||||||
|
dir_pin: PF10
|
||||||
|
enable_pin: !PG2
|
||||||
|
rotation_distance: 40
|
||||||
|
gear_ratio: 80:16
|
||||||
|
microsteps: 32
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_z2]
|
||||||
|
uart_pin: PF2
|
||||||
|
interpolate: false
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 999999
|
||||||
|
|
||||||
|
## Z3 Stepper - Front Right
|
||||||
|
## Connected to MOTOR_5
|
||||||
|
[stepper_z3]
|
||||||
|
step_pin: PC13
|
||||||
|
dir_pin: !PF0
|
||||||
|
enable_pin: !PF1
|
||||||
|
rotation_distance: 40
|
||||||
|
gear_ratio: 80:16
|
||||||
|
microsteps: 32
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_z3]
|
||||||
|
uart_pin: PE4
|
||||||
|
interpolate: false
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 999999
|
||||||
|
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Extruder
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Connected to MOTOR_6
|
||||||
|
## Heater - HE0
|
||||||
|
## Thermistor - T0
|
||||||
|
[extruder]
|
||||||
|
step_pin: PE2
|
||||||
|
dir_pin: PE3
|
||||||
|
enable_pin: !PD4
|
||||||
|
## Update value below when you perform extruder calibration
|
||||||
|
## If you ask for 100mm of filament, but in reality it is 98mm:
|
||||||
|
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
|
||||||
|
## 22.6789511 is a good starting point
|
||||||
|
rotation_distance: 22.6789511 #Bondtech 5mm Drive Gears
|
||||||
|
## Update Gear Ratio depending on your Extruder Type
|
||||||
|
## Use 50:10 for Stealthburner/Clockwork 2
|
||||||
|
## Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
|
||||||
|
## Use 80:20 for M4, M3.1
|
||||||
|
gear_ratio: 50:10 #BMG Gear Ratio
|
||||||
|
microsteps: 32
|
||||||
|
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
|
||||||
|
nozzle_diameter: 0.400
|
||||||
|
filament_diameter: 1.75
|
||||||
|
heater_pin: PA2
|
||||||
|
## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
|
||||||
|
## Use "Generic 3950" for NTC 100k 3950 thermistors
|
||||||
|
sensor_type: ATC Semitec 104NT-4-R025H42G
|
||||||
|
sensor_pin: PF4
|
||||||
|
min_temp: 10
|
||||||
|
max_temp: 270
|
||||||
|
max_power: 1.0
|
||||||
|
min_extrude_temp: 170
|
||||||
|
#control = pid
|
||||||
|
#pid_kp = 26.213
|
||||||
|
#pid_ki = 1.304
|
||||||
|
#pid_kd = 131.721
|
||||||
|
## Try to keep pressure_advance below 1.0
|
||||||
|
#pressure_advance: 0.05
|
||||||
|
## Default is 0.040, leave stock
|
||||||
|
#pressure_advance_smooth_time: 0.040
|
||||||
|
|
||||||
|
## E0 on MOTOR6
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 extruder]
|
||||||
|
uart_pin: PE1
|
||||||
|
interpolate: false
|
||||||
|
run_current: 0.5
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Bed Heater
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
|
||||||
|
## SSR Pin - HE1
|
||||||
|
## Thermistor - TB
|
||||||
|
[heater_bed]
|
||||||
|
heater_pin: PA1
|
||||||
|
## Validate the following thermistor type to make sure it is correct
|
||||||
|
## Keenovo branded bed heaters should use Generic 3950
|
||||||
|
## LDO branded bed heaters will have the sensor type labelled on the heater
|
||||||
|
## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
|
||||||
|
## Use "Generic 3950" for Keenovo heaters
|
||||||
|
sensor_type: ATC Semitec 104NT-4-R025H42G
|
||||||
|
sensor_pin: PF3
|
||||||
|
## Adjust Max Power so your heater doesn't warp your bed. Rule of thumb is 0.4 watts / cm^2 .
|
||||||
|
max_power: 0.7
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 120
|
||||||
|
#control: pid
|
||||||
|
#pid_kp: 58.437
|
||||||
|
#pid_ki: 2.347
|
||||||
|
#pid_kd: 363.769
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Probe
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Inductive Probe
|
||||||
|
## This probe is not used for Z height, only Quad Gantry Leveling
|
||||||
|
[probe]
|
||||||
|
pin: PG15
|
||||||
|
x_offset: 0
|
||||||
|
y_offset: 0
|
||||||
|
#z_offset: 0
|
||||||
|
speed: 10.0
|
||||||
|
samples: 5
|
||||||
|
samples_result: median
|
||||||
|
sample_retract_dist: 3.0
|
||||||
|
samples_tolerance: 0.01
|
||||||
|
samples_tolerance_retries: 5
|
||||||
|
activate_gcode:
|
||||||
|
{% set PROBE_TEMP = 150 %}
|
||||||
|
{% set MAX_TEMP = PROBE_TEMP + 5 %}
|
||||||
|
{% set ACTUAL_TEMP = printer.extruder.temperature %}
|
||||||
|
{% set TARGET_TEMP = printer.extruder.target %}
|
||||||
|
|
||||||
|
{% if TARGET_TEMP > PROBE_TEMP %}
|
||||||
|
{ action_respond_info('Extruder temperature target of %.1fC is too high, lowering to %.1fC' % (TARGET_TEMP, PROBE_TEMP)) }
|
||||||
|
M109 S{ PROBE_TEMP }
|
||||||
|
{% else %}
|
||||||
|
# Temperature target is already low enough, but nozzle may still be too hot.
|
||||||
|
{% if ACTUAL_TEMP > MAX_TEMP %}
|
||||||
|
{ action_respond_info('Extruder temperature %.1fC is still too high, waiting until below %.1fC' % (ACTUAL_TEMP, MAX_TEMP)) }
|
||||||
|
TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={ MAX_TEMP }
|
||||||
|
{% endif %}
|
||||||
|
{% endif %}
|
||||||
|
#####################################################################
|
||||||
|
# Fan Control
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Print Cooling Fan - FAN0
|
||||||
|
[fan]
|
||||||
|
pin: PA8
|
||||||
|
kick_start_time: 2
|
||||||
|
## Depending on your fan, you may need to increase this value
|
||||||
|
## if your fan will not start. Can change cycle_time (increase)
|
||||||
|
## if your fan is not able to slow down effectively
|
||||||
|
off_below: 0.10
|
||||||
|
|
||||||
|
|
||||||
|
## Hotend Fan - FAN1
|
||||||
|
[heater_fan hotend_fan]
|
||||||
|
pin: PE5
|
||||||
|
max_power: 1.0
|
||||||
|
kick_start_time: 4
|
||||||
|
heater: extruder
|
||||||
|
heater_temp: 50.0
|
||||||
|
## If you are experiencing back flow, you can reduce fan_speed
|
||||||
|
#fan_speed: 1.0
|
||||||
|
|
||||||
|
## Controller fan - FAN2
|
||||||
|
[controller_fan controller_fan]
|
||||||
|
pin: PD12
|
||||||
|
kick_start_time: 0.5
|
||||||
|
heater: heater_bed
|
||||||
|
fan_speed: 0.5
|
||||||
|
[bed_mesh]
|
||||||
|
speed: 200
|
||||||
|
horizontal_move_z: 10
|
||||||
|
mesh_min: 40, 40
|
||||||
|
mesh_max: 260,260
|
||||||
|
probe_count: 5,5
|
||||||
|
fade_start: 0.6
|
||||||
|
fade_end: 10.0
|
||||||
|
algorithm: bicubic
|
||||||
|
|
||||||
|
## Exhaust fan - FAN3
|
||||||
|
[heater_fan exhaust_fan]
|
||||||
|
pin: PD13
|
||||||
|
max_power: 1.0
|
||||||
|
shutdown_speed: 0.0
|
||||||
|
kick_start_time: 5.0
|
||||||
|
heater: heater_bed
|
||||||
|
heater_temp: 60
|
||||||
|
fan_speed: 1.0
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# LED Control
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
[output_pin caselight]
|
||||||
|
## Chamber Lighting - CNC_FAN5
|
||||||
|
pin: PD15
|
||||||
|
pwm:true
|
||||||
|
shutdown_value: 0
|
||||||
|
value:0
|
||||||
|
cycle_time: 0.01
|
||||||
|
|
||||||
|
[neopixel headlight]
|
||||||
|
## Stealthburner lighting - RGB_LED
|
||||||
|
pin: PB0
|
||||||
|
chain_count: 3
|
||||||
|
color_order: GRBW
|
||||||
|
initial_RED: 0.0
|
||||||
|
initial_GREEN: 0.0
|
||||||
|
initial_BLUE: 0.0
|
||||||
|
initial_WHITE: 0.0
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Additional Sensors
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
[temperature_sensor chamber]
|
||||||
|
## Chamber Temperature - T1
|
||||||
|
sensor_type: ATC Semitec 104NT-4-R025H42G
|
||||||
|
sensor_pin: PF5
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 100
|
||||||
|
gcode_id: chamber_th
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Homing and Gantry Adjustment Routines
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
[idle_timeout]
|
||||||
|
timeout: 7200
|
||||||
|
|
||||||
|
[safe_z_home]
|
||||||
|
## XY Location of the Z Endstop Switch
|
||||||
|
## Update -10,-10 to the XY coordinates of your endstop pin
|
||||||
|
## (such as 157,305) after going through Z Endstop Pin
|
||||||
|
## Location Definition step.
|
||||||
|
home_xy_position:150,150
|
||||||
|
speed:100
|
||||||
|
z_hop:10
|
||||||
|
z_hop_speed:10
|
||||||
|
|
||||||
|
|
||||||
|
## Use QUAD_GANTRY_LEVEL to level a gantry.
|
||||||
|
## Min & Max gantry corners - measure from nozzle at MIN (0,0) and
|
||||||
|
## MAX (250, 250), (300,300), or (350,350) depending on your printer size
|
||||||
|
## to respective belt positions
|
||||||
|
[quad_gantry_level]
|
||||||
|
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
## Gantry Corners for 250mm Build
|
||||||
|
## Uncomment for 250mm build
|
||||||
|
#gantry_corners:
|
||||||
|
# -60,-10
|
||||||
|
# 310, 320
|
||||||
|
## Probe points
|
||||||
|
#points:
|
||||||
|
# 50,25
|
||||||
|
# 50,175
|
||||||
|
# 200,175
|
||||||
|
# 200,25
|
||||||
|
|
||||||
|
## Gantry Corners for 300mm Build
|
||||||
|
## Uncomment for 300mm build
|
||||||
|
gantry_corners:
|
||||||
|
-60,-10
|
||||||
|
360,370
|
||||||
|
# Probe points
|
||||||
|
points:
|
||||||
|
50,25
|
||||||
|
50,225
|
||||||
|
250,225
|
||||||
|
250,25
|
||||||
|
|
||||||
|
## Gantry Corners for 350mm Build
|
||||||
|
## Uncomment for 350mm build
|
||||||
|
#gantry_corners:
|
||||||
|
# -60,-10
|
||||||
|
# 410,420
|
||||||
|
## Probe points
|
||||||
|
#points:
|
||||||
|
# 50,25
|
||||||
|
# 50,275
|
||||||
|
# 300,275
|
||||||
|
# 300,25
|
||||||
|
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
speed: 100
|
||||||
|
horizontal_move_z: 10
|
||||||
|
retries: 5
|
||||||
|
retry_tolerance: 0.0075
|
||||||
|
max_adjust: 10
|
||||||
|
|
||||||
|
########################################
|
||||||
|
# EXP1 / EXP2 (display) pins
|
||||||
|
########################################
|
||||||
|
|
||||||
|
[board_pins]
|
||||||
|
aliases:
|
||||||
|
# EXP1 header
|
||||||
|
EXP1_1=PE8, EXP1_2=PE7,
|
||||||
|
EXP1_3=PE9, EXP1_4=PE10,
|
||||||
|
EXP1_5=PE12, EXP1_6=PE13, # Slot in the socket on this side
|
||||||
|
EXP1_7=PE14, EXP1_8=PE15,
|
||||||
|
EXP1_9=<GND>, EXP1_10=<5V>,
|
||||||
|
|
||||||
|
# EXP2 header
|
||||||
|
EXP2_1=PA6, EXP2_2=PA5,
|
||||||
|
EXP2_3=PB1, EXP2_4=PA4,
|
||||||
|
EXP2_5=PB2, EXP2_6=PA7, # Slot in the socket on this side
|
||||||
|
EXP2_7=PC15, EXP2_8=<RST>,
|
||||||
|
EXP2_9=<GND>, EXP2_10=<5V>
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Displays
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
#[display]
|
||||||
|
## mini12864 LCD Display
|
||||||
|
#lcd_type: uc1701
|
||||||
|
#cs_pin: EXP1_3
|
||||||
|
#a0_pin: EXP1_4
|
||||||
|
#rst_pin: EXP1_5
|
||||||
|
#encoder_pins: ^EXP2_5, ^EXP2_3
|
||||||
|
#click_pin: ^!EXP1_2
|
||||||
|
#contrast: 63
|
||||||
|
#spi_software_miso_pin: EXP2_1
|
||||||
|
#spi_software_mosi_pin: EXP2_6
|
||||||
|
#spi_software_sclk_pin: EXP2_2
|
||||||
|
|
||||||
|
#[neopixel btt_mini12864]
|
||||||
|
## To control Neopixel RGB in mini12864 display
|
||||||
|
#pin: EXP1_6
|
||||||
|
#chain_count: 3
|
||||||
|
#initial_RED: 0.1
|
||||||
|
#initial_GREEN: 0.5
|
||||||
|
#initial_BLUE: 0.0
|
||||||
|
#color_order: RGB
|
||||||
|
|
||||||
|
### Set RGB values on boot up for each Neopixel.
|
||||||
|
### Index 1 = display, Index 2 and 3 = Knob
|
||||||
|
#[delayed_gcode setdisplayneopixel]
|
||||||
|
#initial_duration: 1
|
||||||
|
#gcode:
|
||||||
|
# SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=1 TRANSMIT=0
|
||||||
|
# SET_LED LED=btt_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=2 TRANSMIT=0
|
||||||
|
# SET_LED LED=btt_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=3
|
||||||
|
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Macros
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
[gcode_macro G32]
|
||||||
|
gcode:
|
||||||
|
#BED_MESH_CLEAR
|
||||||
|
#_CG28
|
||||||
|
#QUAD_GANTRY_LEVEL
|
||||||
|
#G28 Z
|
||||||
|
|
||||||
|
## *** THINGS TO UNCOMMENT: ***
|
||||||
|
## Bed mesh (2 lines at 2 locations)
|
||||||
|
## Z_TILT_ADJUST if your printer is a Trident
|
||||||
|
## Quad gantry level if your printer is a V2
|
||||||
|
## Nevermore - if you have one
|
||||||
|
|
||||||
|
[gcode_macro PRINT_START]
|
||||||
|
gcode:
|
||||||
|
# This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
|
||||||
|
{% set target_bed = params.BED|int %}
|
||||||
|
{% set target_extruder = params.EXTRUDER|int %}
|
||||||
|
{% set target_chamber = params.CHAMBER|default("40")|int %}
|
||||||
|
{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
|
||||||
|
{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
|
||||||
|
|
||||||
|
# Homes the printer, sets absolute positioning and updates the Stealthburner leds.
|
||||||
|
STATUS_HOMING # Sets SB-leds to homing-mode
|
||||||
|
G28 # Full home (XYZ)
|
||||||
|
G90 # Absolut position
|
||||||
|
|
||||||
|
## Uncomment for bed mesh (1 of 2)
|
||||||
|
BED_MESH_CLEAR # Clears old saved bed mesh (if any)
|
||||||
|
|
||||||
|
# Checks if the bed temp is higher than 90c - if so then trigger a heatsoak.
|
||||||
|
{% if params.BED|int > 90 %}
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info
|
||||||
|
STATUS_HEATING # Sets SB-leds to heating-mode
|
||||||
|
M106 S255 # Turns on the PT-fan
|
||||||
|
|
||||||
|
## Uncomment if you have a Nevermore.
|
||||||
|
#SET_PIN PIN=nevermore VALUE=1 # Turns on the nevermore
|
||||||
|
|
||||||
|
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
||||||
|
M190 S{target_bed} # Sets the target temp for the bed
|
||||||
|
SET_DISPLAY_TEXT MSG="Heatsoak: {target_chamber}c" # Displays info
|
||||||
|
TEMPERATURE_WAIT SENSOR="temperature_sensor chamber" MINIMUM={target_chamber} # Waits for chamber to reach desired temp
|
||||||
|
|
||||||
|
# If the bed temp is not over 90c, then it skips the heatsoak and just heats up to set temp with a 5min soak
|
||||||
|
{% else %}
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info
|
||||||
|
STATUS_HEATING # Sets SB-leds to heating-mode
|
||||||
|
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
||||||
|
M190 S{target_bed} # Sets the target temp for the bed
|
||||||
|
SET_DISPLAY_TEXT MSG="Soak for 5min" # Displays info
|
||||||
|
G4 P300000 # Waits 5 min for the bedtemp to stabilize
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
# Heating nozzle to 150 degrees. This helps with getting a correct Z-home
|
||||||
|
SET_DISPLAY_TEXT MSG="Hotend: 150c" # Displays info
|
||||||
|
M109 S150 # Heats the nozzle to 150c
|
||||||
|
|
||||||
|
## Uncomment for V2 (Quad gantry level AKA QGL)
|
||||||
|
SET_DISPLAY_TEXT MSG="QGL" # Displays info
|
||||||
|
STATUS_LEVELING # Sets SB-leds to leveling-mode
|
||||||
|
quad_gantry_level # Levels the buildplate via QGL
|
||||||
|
G28 Z # Homes Z again after QGL
|
||||||
|
|
||||||
|
## Uncomment for bed mesh (2 of 2)
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed mesh" # Displays info
|
||||||
|
STATUS_MESHING # Sets SB-leds to bed mesh-mode
|
||||||
|
bed_mesh_calibrate # Starts bed mesh
|
||||||
|
|
||||||
|
# Heats up the nozzle up to target via data from slicer
|
||||||
|
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Displays info
|
||||||
|
STATUS_HEATING # Sets SB-leds to heating-mode
|
||||||
|
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
||||||
|
M107 # Turns off partcooling fan
|
||||||
|
M109 S{target_extruder} # Heats the nozzle to printing temp
|
||||||
|
|
||||||
|
# Gets ready to print by doing a purge line and updating the SB-leds
|
||||||
|
SET_DISPLAY_TEXT MSG="Printer goes brr" # Displays info
|
||||||
|
STATUS_PRINTING # Sets SB-leds to printing-mode
|
||||||
|
G0 X{x_wait - 50} Y4 F10000 # Moves to starting point
|
||||||
|
G0 Z0.4 # Raises Z to 0.4
|
||||||
|
G91 # Incremental positioning
|
||||||
|
G1 X100 E20 F1000 # Purge line
|
||||||
|
G90 # Absolut position
|
||||||
|
|
||||||
|
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
|
||||||
|
[gcode_macro PRINT_END]
|
||||||
|
gcode:
|
||||||
|
# safe anti-stringing move coords
|
||||||
|
{% set th = printer.toolhead %}
|
||||||
|
{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
|
||||||
|
{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
|
||||||
|
{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
|
||||||
|
|
||||||
|
SAVE_GCODE_STATE NAME=STATE_PRINT_END
|
||||||
|
|
||||||
|
M400 ; wait for buffer to clear
|
||||||
|
G92 E0 ; zero the extruder
|
||||||
|
G1 E-5.0 F1800 ; retract filament
|
||||||
|
|
||||||
|
TURN_OFF_HEATERS
|
||||||
|
|
||||||
|
G90 ; absolute positioning
|
||||||
|
G0 X{x_safe} Y{y_safe} Z{z_safe} F20000 ; move nozzle to remove stringing
|
||||||
|
G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600 ; park nozzle at rear
|
||||||
|
M107 ; turn off fan
|
||||||
|
|
||||||
|
BED_MESH_CLEAR
|
||||||
|
RESTORE_GCODE_STATE NAME=STATE_PRINT_END
|
||||||
|
|
||||||
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||||
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||||
|
#*#
|
||||||
|
#*# [heater_bed]
|
||||||
|
#*# control = pid
|
||||||
|
#*# pid_kp = 38.412
|
||||||
|
#*# pid_ki = 1.237
|
||||||
|
#*# pid_kd = 298.171
|
||||||
|
#*#
|
||||||
|
#*# [extruder]
|
||||||
|
#*# control = pid
|
||||||
|
#*# pid_kp = 16.225
|
||||||
|
#*# pid_ki = 1.215
|
||||||
|
#*# pid_kd = 54.151
|
||||||
|
#*#
|
||||||
|
#*# [probe]
|
||||||
|
#*# z_offset = -1.500
|
||||||
Loading…
Reference in New Issue
Block a user