Commit Graph

17624 Commits

Author SHA1 Message Date
Morph
30e0d1c973 controllers/npad: Remove the old vibration filter
Previously we used a vibration filter that filters out amplitudes close to each other. It turns out there are cases where this results into vibrations that are too inaccurate. Remove this and move the 100Hz vibration filter (Only allowing a maximum of 100 vibrations per second) from sdl_impl to npad when enable_accurate_vibrations is set to false.
2020-11-15 23:33:21 -05:00
Morph
91c06dae1a input: Disconnect a controller prior to connecting a new one
Some games do not respond to a change in controller type if 1) The controller is not disconnected prior to being reconnected and/or 2) The controller is reconnected instantly after being disconnected.

Since it is not possible to change controllers instantly on hardware and requiring a disconnect prior to connecting a new one, we should emulate this as well with a small delay, fixing the aforementioned issue.
2020-11-15 23:33:21 -05:00
Morph
978ca65f59 hid: Implement InitializeVibrationDevice and IsVibrationDeviceMounted 2020-11-15 23:33:20 -05:00
Morph
e9e1876e82 input_common: Add VibrationDevice and VibrationDeviceFactory
A vibration device is an input device that returns an unsigned byte as status.
It represents whether the vibration device supports vibration or not.
If the status returns 1, it supports vibration. Otherwise, it does not support vibration.
2020-11-15 23:33:20 -05:00
Morph
38110dd485 configure_input: Add per-player vibration
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.

Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-11-15 23:33:20 -05:00
Morph
d6a41cfc21 settings: Remove global vibration strength modifier
This will be replaced in favor of per-player vibration strength modifiers.
2020-11-15 23:33:20 -05:00
Morph
92fa5257c7 hid: Mark Begin/EndPermitVibrationSession as stubs
The implementation of these commands seem incomplete and causes rumble in Super Mario Party to stop working since only EndPermitVibrationSession is called. Thus, these are better off being marked as a stub until this can be investigated more thoroughly.
2020-11-15 23:33:20 -05:00
Morph
373408ae8c controllers/npad: Send an empty vibration on destruction/deactivation
This stops all controllers from continuously vibrating when emulation is stopped.
2020-11-15 23:33:20 -05:00
Morph
70f16f1722 hid: Stub IsVibrationDeviceMounted
- Used in Super Mario Odyssey
2020-11-15 23:33:20 -05:00
Morph
9b501af8e3 controllers/npad: Add heuristics to reduce rumble state changes
Sending too many state changes in a short period of time can cause massive performance issues.
As a result, we have to use several heuristics to reduce the number of state changes to minimize/eliminate this performance impact while maintaining the quality of these vibrations as much as possible.
2020-11-15 23:33:20 -05:00
Morph
652d6766d5 configure_input: Hook up the vibration percentage spinbox
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
2020-11-15 23:33:20 -05:00
Morph
e02ef3c3be controllers/npad: Stop games from vibrating incorrect controllers
Fixes vibration in 1-2 Switch and potentially other games where they would vibrate both players' joycons at the same time.
2020-11-15 23:33:20 -05:00
Morph
07b81f57ba hid: Fix controller rumble based on new research
This fixes the issue where rumble is only sent to the first controller.
Now, individual controllers can receive their own rumble commands.
2020-11-15 23:33:20 -05:00
Morph
31de52513e hid: Pop a struct of parameters instead of popping individual parameters
Some parameters need to be doubleword aligned due to the presence of the applet_resource_user_id.
Previously, this value was invalid in many commands where it was not doubleword aligned when popped.
2020-11-15 23:33:20 -05:00
Morph
e3c2749986 hid: Reorder all HID commands
Reorders all HID commands in command id order.
2020-11-15 23:33:20 -05:00
Morph
b92bf51ae1 hid: Implement GetVibrationDeviceInfo
The first u32 describes the vibration device type which is a Linear Resonant Actuator used in Nintendo Switch controller hardware.

The second u32 describes the vibration device position, in this case distinguishing between left and right vibration actuators.

Pro Controllers have 2 LRAs each that can vibrate independently of each other, which means they have 2 distinct vibration device handles to distinguish between the two actuators.

Similarly for joycons, the left joycon can be distinguished from the right joycon through the vibration device handle since each joycon has 1 LRA.
2020-11-15 23:33:20 -05:00
Morph
16e2e1c45f hid: Stub InitializeVibrationDevice 2020-11-15 23:33:20 -05:00
Morph
428ce8ec29 controllers/npad: Rename NPadType to NpadStyleSet
This more accurately represents the underlying type and avoids confusion with NpadType
2020-11-15 23:33:20 -05:00
Morph
0a966e2cac controllers/npad: Add DeviceHandle struct
A DeviceHandle describes a vibration device or six-axis sensor based on the npad type, npad id, and device index/position
2020-11-15 23:33:20 -05:00
Morph
ceb7b11f16 configure_input_player: Change "Defaults" button behavior
RestoreDefaults() now restores the selected devices' mappings using UpdateMappingWithDefaults().
This allows us to move the keyboard mapping from RestoreDefaults() to UpdateMappingWithDefaults().
2020-11-15 23:33:20 -05:00
Morph
8f2959f680 settings: Preparation for per-game input settings 2020-11-15 23:33:20 -05:00
Morph
8ead176639 udp/client: Reduce testing period to 5 seconds 2020-11-15 23:33:19 -05:00
Morph
64e174237e config: Migrate config files into config/custom
Co-authored-by: lat9nq <lat9nq@virginia.edu>
2020-11-15 23:33:19 -05:00
Morph
c0c4ed0d3b controllers/npad: Connect a controller on init if none are connected 2020-11-15 23:33:19 -05:00
Morph
5cafa70d3b applets/controller: Auto accept a valid single player configuration 2020-11-15 23:33:19 -05:00
Morph
484623cd61 bootmanager: Allow mouse clicks only if touch is disabled
Previously mouse clicks will not register when touch is disabled.
This rectifies that and allows mouse clicks to be mapped to other buttons if the touchscreen is disabled.
2020-11-15 23:33:19 -05:00
Morph
57d89e291d input_profiles: Implement input profiles 2020-11-15 23:33:19 -05:00
Morph
75eaab2e0f configure_input_player: Implement input exclusivity and persistence
With this, the "Input Devices" combobox should accurately reflect the input device being used and disallows inputs from other input devices unless the input device is set to "Any".
2020-11-15 23:33:19 -05:00
Morph
9d4edd4e88 ui/themes: Cleanup UI 2020-11-15 23:33:19 -05:00
Lioncash
0a50ba3bd1 motion_input: Mark constructor as explicit 2020-11-15 14:20:41 -05:00
Lioncash
cb826bcee7 motion_input: Mark member functions as [[nodiscard]] where applicable 2020-11-15 14:18:09 -05:00
LC
ce718522bc
Merge pull request #4914 from lat9nq/gl-warnings
bootmanager: Log and show GL_RENDERER string when GPU is insufficient
2020-11-15 06:33:48 -05:00
bunnei
87f220efff
Merge pull request #4895 from Morph1984/cave-story-plus-applet-fix
applets/controller: Introduce additional checks for mode and caller
2020-11-12 21:55:06 -08:00
ReinUsesLisp
622830f4e1 maxwell_3d: Use insert instead of loop push_back
This reduces the overhead of bounds checking on each element.
It won't reduce the cost of allocation because usually this vector's
capacity is usually large enough to hold whatever we push to it.
2020-11-11 19:52:19 -03:00
ReinUsesLisp
9ea8cffe35 maxwell_3d: Move code to separate functions
Deduplicate some code and put it in separate functions so it's easier to
understand and profile.
2020-11-11 19:52:19 -03:00
german
f5110340e6 fix minor clang error 2020-11-10 10:38:15 -06:00
bunnei
c22d0d9945
Merge pull request #4901 from bunnei/caps-stub
hle: service: caps_u: Stub GetAlbumFileList3AaeAruid.
2020-11-09 21:20:08 -08:00
Chloe Marcec
fc4d692c50 Addressed issues 2020-11-10 15:57:36 +11:00
Chloe Marcec
31c12de0fe core: Make nvservices more standardized 2020-11-10 15:57:35 +11:00
lat9nq
c433c0a746 bootmanager: Address review comments
Changes QMessageBox usages to warnings, as the problems they bring to
light are being safely handled by the application and do not warrant
something of the "critical" level.

Changes LOG_CRITICAL to LOG_ERROR for the same reason. Preferring ERROR
to WARNING as yuzu is denying loading of any guest applications after
checking for these conditions.

Moved logging the GL_RENDERER string into GetUnsupportedGLExtensions()
to make more clear that unsupported extensions were already being
logged. Makes placement of the logs easier to understand later, as well.
2020-11-09 22:55:05 -05:00
lat9nq
945cfe234b bootmanager: Log and show GL_RENDERER string when GPU is insufficient
Changes the first message to not include the OpenGL version, as the
error is caused by OpenGL failing to load.

Adds a new check for OpenGL version 4.3. This will display a message
with a similar error as well as the GL_RENDERER string. Adds a CRITICAL
log message when triggered. This prevents a crash with yuzu trying to
use older OpenGL versions.

Modifies the unsupported extension message to output the GL_RENDERER
string in the message, as well as logging the string.
2020-11-09 22:12:41 -05:00
Rodrigo Locatti
9b24197ca0
Merge pull request #4909 from lioncash/interrupt
cpu_interrupt_handler: Mark move contructor/assignment as deleted
2020-11-08 22:09:40 -03:00
Rodrigo Locatti
8008b5ddc9
Merge pull request #4910 from lioncash/service
ipc_helpers: Remove usage of the global system instance
2020-11-08 19:11:31 -03:00
Lioncash
da7be67daf ipc_helpers: Remove usage of the global system instance
Resolves numerous deprecation warnings throughout the codebase due to
inclusion of this header. Now building core should be significantly less
noisy (and also relying on less global state).

This also uncovered quite a few modules that were relying on indirect
includes, which have also been fixed.
2020-11-08 15:58:11 -05:00
Lioncash
0aad914527 cpu_interrupt_handler: Mark move contructor/assignment as deleted
The interrupt handler contains a std::atomic_bool, which isn't copyable
or movable, so the special move member functions will always be deleted,
despite being defaulted.

This can resolve warnings on clang and GCC.
2020-11-08 15:37:04 -05:00
german
70df449d0a Allow to dial any angle with digital joystick 2020-11-08 09:15:33 -06:00
Morph
a6ecdf42bc applets: Rename LibraryAppletVersion to ControllerAppletVersion 2020-11-08 10:04:12 -05:00
Morph
9efbf5309f applets/controller: Pop normal data for StrapGuide and FirmwareUpdate 2020-11-08 09:35:25 -05:00
Morph
af1183a993 applets/controller: Introduce additional checks for mode and caller
Some games like Cave Story+ set invalid values in the ControllerPrivateArg's mode and caller fields.
Use other fields to determine the appropriate mode and caller should either or both fields be invalid.
2020-11-08 09:35:25 -05:00
Morph
88192af8ac applets/controller: Add ControllerUpdateFirmwareArg struct 2020-11-08 09:35:25 -05:00